The Best Usage Method; Maintenance Method; Cleaning Panel - Gree GMV-ND06G/B4B-T Owner's Manual

Multi Variable Air Conditioners Wall Mounted Type Indoor Unit

6 The Best Usage Method

Do not pour water to unit or clean it by water, otherwise a malfunction or electric shock may happen.
(1) Adjust to proper indoor temperature; too cool of indoor temperature is not good for health.
(2) Adjust the set temperature properly in proper to prevent electricity wasting. It is better
tocontrol the difference of the indoor and outdoor temperatures within 5°C (41°F).
(3) The better effect will be maintained by adjusting the guide louver downward for heating and
horizontal for cooling.
(4) When the air conditioner is running, don't open windows or doors for long time, otherwise
the efficiency of unit will be lowered.
(5) Prevent the cooled air blowing to body directly for long time and making indoor temperature
too low, for it is bad for health.
(6) Do not mangle the power cord and the communication cord. The damaged power cord and
communication cord can only be replaced by the specified ones.
(7) This air conditioner cannot be used for drying clothes and refrigerating food, etc.

7 Maintenance Method

(1) Do turn off the unit and cut off the main power supply when cleaning the air conditioner to avoid electric shock or
injury.
(2) Stand at solid table when cleaning the unit.
(3) Do not clean the unit with hot water whose temperature is higher than 45°C (113°F) to prevent fade or deformation.
(4) Do not dry the filters by fire, or it may catch fire or become deformed.
(5) Volatile liquid like thinner or gasoline would damage the appearance of the air conditioner (Only soft dry cloth and wet
cloth moistened with neutral detergent could be used to clean the surface panel of the air conditioner).
(6) Please contact after-sales service staff if there is abnormal situation.

7.1 Cleaning Panel

Do take down it before cleaning.
(1) Pull along the direction of arrows to take down the panel.
(2) Clean the panel.
Clean it with a soft-hair brush, water and neutral cleaning fluid, and then dry it.
Fig. 5.8
12