Advertisement
Available languages
Available languages
GB
Control Panel (front)
Source / Light
Press to select source between BT, FM and Aux.
Press and hold 2sec to turn on or off light.
10+ / Repeat
In USB mode, press this button will skip forward
10 tracks. In USB mode, press and hold this button
2sec to set current track to Repeat 1, All or normal.
STANDBY
After main Power on, press this to switch the device on.
Power
Press to power the
unit on or off.
POWER
Mic Volume
REPEAT
Press to adjust the
microfone volume.
DC Power Input
Echo (microphone)
MICROPHONE
Includes 2 microphones. There are 2 microphone inputs on the device for the microphones.
1. Insert the microphone jack (6.3mm) into the microphone socket.
2. Turn the speaker volume control at least to minimum. The microphone is now ready for use.
3. You can make the microphone louder or quieter using the microphone volume control.
4. You can switch on and adjust the echo function, if required, using the echo control.
E-guitars with a 6.3 mm jack can also be connected to the microphone inputs.
Operation and volume control are the same as described for the microphone.
Please remember to increase the volume gradually when using e-guitars.
POWER & CHARGING
Requires an AC/DC power adapter (included).
Using the included power adapter, plug the adapter into a standard
wall outlet and the DC Power Input on the speaker.
When the battery is charging, the Charging Indicator on the front of the unit will display solid red.
When the battery is fully charged, the Charging Indicator will turn green.
When battery power is low, the Charging Indicator will flash red.
START
Press the Power switch to power the unit on, unit start at STANDBY mode.
When the unit is in STANDBY MODE, press
to start the unit.
AUX IN
Using Aux In (3.5mm Audio Input)
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the AUX In on the unit and the
audio output/headphone jack on a media player.
2. Power on the unit and press the Source button to select AUX.
3. Use the controls on the connected device to select and play audio.
BLUETOOTH
Pairing to a Device and Playing Audio
1. Press Source to select bt, Bluetooth Indicator will light up.
2. Press and hold the Pair/Play/Pause button to begin pairing. The bt on the LED display will begin flashing quickly. When pairing, remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device, scan for and select MA113 in your Bluetooth settings to pair. If your device requests a password, enter the default
password 0 0 0 0. Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth devices.
4. When successfully paired, the bt on the LED display will stop flashing and an audible chime will sound through the speaker.
5. Use the controls on the connected device to select an audio track.
6. Audio played through the connected Bluetooth device will now be heard through the speaker.
Use controls on the unit or your device to play, pause, and change the volume.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.
If your device should become unpaired or you find it is unable to connect, repeat the above steps.
FM RADIO/SCAN/MEMORY PRESETS
This unit features an internal FM radio antenna. To improve radio reception, adjust the position of the unit.
STORING MEMORY PRESETS
1. Press Source to select FM mode.
2. Press & Hold Scan for 2 to 3 seconds. The unit will automatically search and store all available stations (P01-P20).
Skip/Search/Tun +/−
Press to skip between tracks.
In FM mode, press to cycle
through memory presets.
Pair/Play/Pause/Scan
Press to Play/ Pause an audio track.
LED Display
At BT mode, press and hold 2sec to begin pairing.
STANDBY
At FM mode, press and hold to search
all available station.
LIGHT
USB
REPEAT
10+
SCAN
STANDBY
USB Port
Bass
Treble
TUNING TO A MEMORY PRESET
1. Press the Tun +/− buttons to select from P01 to P20.
TUNING MANUALLY
1. To tune a specific station, press Scan once. The display will begin flashing.
2. Press Tun +/− to tune the station manually.
USB PLAYER OPERATIONS
1. Press Source to select USB, USB indicator will light up.
2. Plug the USB flash drive into the USB port on the front of the unit. The USB will playing automatically.
3. During USB playback, press the PAIR/SCAN/PLAY/PAUSE button to pause USB play and press again to resume.
4. Press >>| / TUN+or |<< /TUN- or buttons to jump to next or previous track.
5. Press and hold >>| / TUN+or |<< /TUN- or buttons to search rapidly within a track to locate a specific passage.
Aux In
(3.5 mm Audio Input)
Important Safety Instructions
• Read these Instructions.
Master Volume
• Keep these Instructions.
Turn to adjust the
• Heed all Warnings.
volume up or down.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
Mic Input 1, 2
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers that produce heat.
• Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
When the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
• CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft porous, or sensitive finish. As with any rubber compound made
with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass
between the unit and the surface to reduce the risk of damage and/or staining.
• WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote.
If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
• WARNING: Shock hazard - Do Not Open.
• Caution and marking information is located at the rear or bottom of the apparatus.
• Objects filled with liquids, such as vases, shall not be placed on the apparatus.
• Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect
the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep new and used batteries away from children. If the battery compartment does not close securely,
stop using the product and keep it away from children.
CAUTION
WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside.
ATTENTION
Refer servicing to service personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.
Hereby, Jako-o GmbH, declares that this Bluetooth device is in compliance with the essential requirements and other relevant provisions of Directive 2014/ 53 / EG. A copy of
the Declaration of Conformity may be obtained at the following location: Jako-o GmbH, August-Grosch-Str. 28-38, 96476 Bad Rodach/Germany
Advertisement
