Inserting And Ejecting A Cd - Samsung NP-R518 User Manual (FreeDos) User Manual

Inserting and Ejecting a CD

1
Click the Eject button of the optical disk drive at the side of the computer.
 Do not pull or push the disc by force when the disc is being automatically ejected or
inserted. This may cause a problem when ejecting or inserting a disc.
 To insert a disc, insert the disc into the center of the drive with the appropriate
pressure. If you insert a disc and apply excessive force to one side of the tray, it may
result in a problem.
2
When the CD tray pops out, insert a CD or DVD until it clicks.
3
Push the CD tray inward until it clicks. The CD drive status indicator is turned on.
 A CD drive's reading and writing speed may differ depending on the condition and
type of the media.
 To eject a CD when the CD drive does not work or the computer is off, place the end
of a paper clip
(
Bonn_R518_Dos_Eng.indb 55
Status Indicator
Eject Button
) into the Emergency Hole until the CD tray is ejected.
55
Emergency
Hole
2009-03-25 오후 1:30:59