Wireless Network Setup Using The Wireless Lan Setup Program - Samsung NP-Q35 User Manual

3. Enter a cryptographic key in the network key box and click Connect.
If the network key is not configured in "Connecting to computer-to-computer
networks (peer-to-peer or ad hoc)" on page 66, just click Connect, without any
keystrokes.
When connected to the wireless network, the system displays Connected in the
selected network of the Network Connection window.
Checking the connection status
Move the mouse pointer over the Wireless Network Connection (
the taskbar, and the connection status is displayed.
Wireless Network Setup Using the Wireless LAN Setup
Program
The procedures to connect to an access point using a wireless LAN configuration
program are described. Since the wireless LAN configuration program is included in
the system software media, the user has to install the program.
1. Insert the system software media into the CD drive and install the wireless LAN
configuration program (PROSet).
Select System Software Media > User Installation > Wireless LAN Driver
ReadMe, click ReadMe and install according to the instructions.
) icon on
Connecting to the Internet 69