TCC S-LINE Mesh Series Operating Instructions Manual page 7

english
1. Kinematic
Pull up the left lever underneath the seat:
Adjustment (in 3 positions). Press down the lever:
Release of the synchronous mechanism for dynam-
ic seating.
2. Seat height adjustment
To raise or lower the height of the seat on an
infinitely variable scale, pull adjustment lever
on the right side underneath the seat upwards.
Caution! The pneumatic springs should be
repaired or replaced by trained personnel only.
3. Seat depths adjustment (optional)
Hold down the front lever underneath the seat
and move the seat with your buttom into the
desired position (7 positions are possible).
4. Seat inclination adjustment (optional)
Press the lever on the rear left side underneath
the seat and adjust negative seat inclination
(-3°).