Table of Contents
Advertisement
Monitor
Notebook
Intel(R) Dual
Display Clone
Extended
Desktop
To switch display devices using shortcut key
You can switch display devices easily by pressing <Fn>+<F4/
key.
Provided that multiple external display devices are connected, the display
order is LCD > CRT > LCD+CRT > LCD whenever the <Fn>+<F4 /
are pressed.
You cannot use the <Fn>+<F4/
prompt or extended desktop.
To change display devices easily
Right-click on the desktop, and select Graphics Options > Output To to change
the current display device easily.
To change the screen resolution and color quality
If the screen does not appear clearly, please try to change the screen
resolution and colour quality. In the figure of step 3, select a Display Settings,
and adjust Color Quality, Screen Resolution, Refresh Rate of right screen.
When using an LCD and a wide monitor, the LCD and monitor screen sizes
may differ. To make them the same size, select 'Intel(R) Dual Display Clone'.
76 Users Manual
Displays on an external device such as monitor or a projector.
Displays on the notebook LCD only.
Displays the same screen on the notebook LCD, and an external device such as
monitor or projector.
Extends the screen into the notebook LCD and an external device such as monitor or
projector to use a 2 times larger workerspace.
> shortcut key in the full screen mode DOS
> shortcut
> keys
Advertisement
Table of Contents
