Never add flammable liquid of any kind to the machine. Make sure there are no flammable materials close to the machine while operating. Only use Air Guard Antibacterial Solution. Other solution may lead to heater clog and malfunction. If the machine fails to work, unplug the machine and stop operation immediately. Contact your local dealer for advice.
Air Guard Antibacterial Solution may present health risks if swallowed. Do not drink Air Guard solution. Store it securely. In case of eye contact or if solution is swallowed immediately look for medical advice. Unpacking and Inspection Immediately upon receiving the antibacterial vaporizer, carefully unpack the carton, check the content to ensure that all parts are present and have been received in good condition.
Step 1: Place the machine on a flat surface and in an area with at least 50 cm open space at each side of the machine. Step 2: Fill the fluid tank with Air Guard fluid. Always connect the machine to a protected circuit and ensure it is properly...
Page 6
Step3: Connect the battery base or power base to the fog machine. Turn on the machine to start operation. Pull to release locking lever Align and insert head unit to base Battery and Chargers When the LED indicator on the charger turns red, the battery is being charged. When it turns green, the charging process is completed.
To stop timed fogging immediately, press once handle button or press once the button B on the wireless transmmiter. Radio Wireless Remote System Radio wireless remote control system consists of a transmitter with two buttons to activate and deactivate fogging. The wireless signal receiver (antenna) is attached to the rear panel of AG-20. W-1 Wireless Transmitter...
Press [A] button to emit fog and press [B] button to stop fogging. Wireless Signal Receiver (Antenna) In an open space, the maximum distance of the radio wireless remote is 50 meters. However, the operating distance depends on obstacle levels. Pairing and Deleting a transmitter with receiver Transmitters can be paired or deleted from the wireless signal receiver.
Fluid Use Air Guard FLD / FLV Antibacterial Solution for AG-20. The machine is tested and calibrated with these authorized fluids to achieve the best performance. Warranty will be void, if any other type of liquid is used. Improper use of liquid may lead to machine failure and danger.
Need help?
Do you have a question about the AG-20 and is the answer not in the manual?
Questions and answers