Advertisement
PART III
OPERATING INSTRUCTIONS
WARNING
AFTER TURNING OFF YOUR REFRIGERATOR
YOU MUST WAIT AT LEAST 5 MINUTES BEFORE
RESTARTING TO AVOID DAMAGE TO THE
COMPRESSOR
ALTERING THE TEMPERATURE (FREEZERS WITH
ELITECH
ECS-180 DIGITAL TEMPERATURE
CONTROL)
refulgence
-22.0
YOUR FREEZER FEATURES A DIGITAL CONTROLLER.
ALL PARAMETERS ARE PRESET AT THE FACTORY
FOR OPTIMUM COOLING PERFORMANCE AND
EFFICIENCY. ALTERING THE PARAMETERS OF THE
DIGITAL CONTROLLER WILL ADVERSELY AFFECT
THE COOLING EFFICIENCY AND PERFORMANCE
OF THE FREEZER.
TO CHANGE THE SET POINT OF YOUR FREEZER
PRESS THE SET BUTTON FOR 3 SECONDS UNTIL ST
IS DISPLAYED IN THE DISPLAY. WITH ST SHOWING
IN THE DISPLAY PRESS THE SET KEY AGAIN, THE
CURRENT SET POINT IS NOW DISPLAYED ON THE
CONTROLLER. TO ADJUST THE SET POINT USE
THE UP AND DOWN ARROWS TO SELECT THE NEW
TEMPERATURE AND THEN PRESS SET ONCE AGAIN
TO STORE THE NEW VALUE.
CHANGING THE SET POINT WILL AFFECT
THE
PERFORMANCE
THE REFRIGERATOR AND SHOULD ONLY BE
UNDERTAKEN BY A QUALIFIED REFRIGERATION
ENGINEER.
ALTERING THE TEMPERATURE (REFRIGERATORS
WITH ELITECH ECS-16 DIGITAL TEMPERATURE
CONTROL)
refulgence
2.2
YOUR REFRIGERATOR FEATURES A DIGITAL
CONTROLLER.
ALL PARAMETERS ARE PRESET
AT THE FACTORY FOR OPTIMUM COOLING
PERFORMANCE AND EFFICIENCY. ALTERING THE
PARAMETERS OF THE DIGITAL CONTROLLER WILL
ADVERSELY AFFECT THE COOLING EFFICIENCY
AND PERFORMANCE OF THE REFRIGERATOR.
XD080818UM Rev 1.3
AND
EFFICIENCY
OF
TO
CHANGE
THE
REFRIGERATOR PRESS THE SET BUTTON FOR 3
SECONDS UNTIL ST IS DISPLAYED IN THE DISPLAY.
WITH ST SHOWING IN THE DISPLAY PRESS THE
SET KEY AGAIN, THE CURRENT SET POINT IS NOW
DISPLAYED ON THE CONTROLLER. TO ADJUST THE
SET POINT USE THE UP AND DOWN ARROWS TO
SELECT THE NEW TEMPERATURE AND THEN PRESS
SET ONCE AGAIN TO STORE THE NEW VALUE.
CHANGING THE SET POINT WILL AFFECT
THE
PERFORMANCE
THE REFRIGERATOR AND SHOULD ONLY BE
UNDERTAKEN BY A QUALIFIED REFRIGERATION
ENGINEER.
ALTERING THE TEMPERATURE (REFRIGERATORS
FITTED WITH AN SF-101 CONTROLLER)
SET
SF-101
YOUR COOLER FEATURES A DIGITAL CONTROLLER.
ALL PARAMETERS ARE PRESET AT THE FACTORY
FOR OPTIMUM COOLING PERFORMANCE AND
EFFICIENCY. ALTERING THE PARAMETERS OF THE
DIGITAL CONTROLLER WILL ADVERSELY AFFECT
THE COOLING EFFICIENCY AND PERFORMANCE
OF THE COOLER.
TO CHANGE THE SET POINT OF YOUR COOLER
PRESS AND HOLD THE SET BUTTON, THE DISPLAY
WILL FLASH AND THE CURRENT SET TEMPERATURE
WILL BE DISPLAYED. USE THE UP AND DOWN
ARROWS
TO
ADJUST
ACCORDING TO YOUR NEEDS AND PRESS THE SET
BUTTON AGAIN TO STORE THE NEW SET POINT.
CHANGING THE SET POINT WILL AFFECT THE
PERFORMANCE AND EFFICIENCY OF THE COOLER
AND SHOULD ONLY BE UNDERTAKEN BY A
QUALIFIED REFRIGERATION ENGINEER.
4
SET
POINT
OF
YOUR
AND
EFFICIENCY
THE
TEMPERATURE
OF
Advertisement
