Advertisement
Quick Links
RENFREW CONVERSATION
SECTIONAL SET
PRODUCT NO. 088-2040-4
ASSEMBLY INSTRUCTIONS
Toll free: 1-888-670-6684
IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly
of product, make sure all parts are present. Compare parts with packaging contents list. If any part is
missing, or if you have any questions, contact the customer service department at 1-888-670-6684.
Advertisement
Related Manuals for Canvas Renfrew 088-2040-4
Summary of Contents for Canvas Renfrew 088-2040-4
- Page 1 RENFREW CONVERSATION SECTIONAL SET PRODUCT NO. 088-2040-4 ASSEMBLY INSTRUCTIONS Toll free: 1-888-670-6684 IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product, make sure all parts are present. Compare parts with packaging contents list. If any part is missing, or if you have any questions, contact the customer service department at 1-888-670-6684.
- Page 2 Made in China IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8...
- Page 3 Table of Contents Important Safety Instructions Parts list - loveseat Assembly - loveseat Parts list-sofa Assembly - sofa 9-10 Parts list-table Assembly - table 12-14 Cleaning and Maintenance Technical Data Warranty Warning! To reduce the risk of serious injury, read the following safety instructions before assembling and using these products.
- Page 4 PRODUCT NO. 088-2040-4 CAUTION! The maximum weight capacty for the loveseat & sofa is 250 lb (113.39 kg) per seat. The • maximum load for table is 44 lb (20 kg). Do not stand on loveseat or sofa; do not sit or stand on table. Keep children away during assembly.
- Page 5 Right arm panel-1 Screw with washer M6X20 - 1 Back panel-1 Screw with washer M6X40 - 7 Seat panel -1 Hex key - 1 Back cushion -2 Seat cushion -2...
- Page 6 PRODUCT NO. 088-2040-4 Note: Do not tighten screws all the way until you have assembled the loveseat. Once assembly is complete, tighten each screw. Step 1 Requires part 1, 3, B, C Attach right arm (1) to the seat panel (3) by using M6X40 screw (B) with washers, aligning the holes.
- Page 7 Step 3 Requires parts 1,2, A Connect right arm (1) with back panel (2) by using M6X20 screw (A), then tighten the screws with Hex Key (C). Step 4 Requires parts 4,5 Put the seat cushions (5) and back cushions (4) on the seat.
- Page 8 PRODUCT NO. 088-2040-4 Right arm panel-1 Screw with washer M6X20 - 6 Left arm panel-1 Screw with washer M6X40 - 8 Back panel-1 Hex key - 1 Seat panel-2 Middle leg-1 Longer Sectional back cushion -1 Shorter Sectional back cushion -1 Back cushion-2 Seat cushion-3...
- Page 9 Note: Do not tighten screws all the way until you have assembled the sofa. Once assembly is complete, tighten each screw. Step 1 Requires part 2, 4, B, C Attach left arm panel (2) to the seat panel (4), using the screws (B) with washers, aligning the holes.
- Page 10 PRODUCT NO. 088-2040-4 Step 3 Requires parts 1,3,4,A,B Connect right arm panel (1) to the seat panel (4) by using the screw (B), then connect back panel (3) to the right (1) by using screw (A). Then tighten the screws with Hex Key (C).
- Page 11 Table top-1 Screw with washer M6X20 - 16 Inner support leg-2 Screw with washer M6X40 - 8 Nut M8-4 Connecting bar-2 Base connecting bar-1 Hex key - 1 Wrench-1 Longer side panel-2 shorter side panel-2 Table foot-4...
- Page 12 PRODUCT NO. 088-2040-4 Note: Do not tighten screws all the way until you have assembled the table. Once assembly is complete, tighten each screw. Step 1 Requires part 2, 3, A, D Connect two support legs (2) by two connecting bar (3), using M6X20 screw (A), aligning the holes.
- Page 13 Step 3 Requires parts 4,5,6,A,B, Connect the longer side panel (5) to two pieces of shorter side panel (6) by using M6X40 screw (B), then attach the base connecting bar (4) to the panel (5) by using M6X20 screw (A), then tighten the screws with Hex Key (D). Step 4 Requires parts 5,A,B, Connect the another longer side panel (5) to two pieces of shorter side panel (6) by using...
- Page 14 PRODUCT NO. 088-2040-4 Step 5 Requires part 7, C, E Attach the table feet (7) to the table side panel, using the M8 nuts (C) with the help of wrench (E). Step 6 Turn the table to the upright position, then insert the table top into the base panel, when the table is at the dining height, press two buttons (black) underneath to lock the support leg to keep it stable.
- Page 15 Step 7 To lower table, release the lock by pressing 2 red buttons underneath; have 2 people lift table top, rotate 90° and push down towards base. 90°...
-
Page 16: Product Weight
PRODUCT NO. 046-3456-8 | MODEL NO. 088-163 PRODUCT NO. 088-2040-4 CAUTION! Check all screws and nuts periodically for tightness, tightening them • again as required. Disassemble the table in the reverse order of the assembly steps. • Always disassemble the table completely. Clean the product with a slightly damp cloth and a little detergent. - Page 17 This CANVAS product carries a one (1) year warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or...