Table of Contents
Advertisement
S
MAINTENANCE AND STORAGE
ATTENTION:
One-year periodic recalibration is
necessary to maintain accuracy.
Please contact your local dealer for
calibrations.
CAUTION:
as a hammer.
4.
Do not leave this wrench in any place exposed to
excessive heat, humidity, or direct sunlight.
5.
Do not use this apparatus in water.(not
waterproof)
6.
If the wrench gets wet, wipe it with a dry towel
as soon as possible. The salt in seawater can be
especially damaging.
7.
Do not use organic solvents, such as alcohol or
paint thinner when cleaning the wrench.
8.
Keep this wrench away from magnets.
9.
Do not expose this wrench to dust or sand as this
could cause serious damage.
10. Do not apply excessive force to the LCD panel.
11. Apply torque slowly and graspe the center of the
handle. Do not apply load to the end of handle
BATTERY MAINTENANCE
1.
When the wrench is not used for an extended
period of time, remove the battery.
2.
Keep a spare battery on hand when going on a
long trip or to cold areas.
3.
Do not mix battery types or combine used
batteries with new ones.
4.
Sweat, oil and water can prevent a battery's
terminal from making electrical contact. To
avoid this, wipe both terminals before loading a
battery.
5.
Dispose of batteries in a designated disposal area.
Do not throw batteries into a fire.
1.
Over-torque (110% of
Max. torque range)
could cause breakage
or lose accuracy.
2.
Do not shake violently
or drop wrench.
3.
Do not use this wrench
Rev.： 266 1.0
15
Advertisement
Table of Contents
