Table of Contents
Advertisement
[PC] → [DVI] → [AV] → [HDMI] → [MagicInfo] → [Component] →
[BNC]
Enter button [ ]
Activates a highlighted menu item.
•
MENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu
or return to the previous menu.
- VOL+
Moves from one menu item to another horizontally or adjusts selected menu val-
ues. When OSD is not on the screen, push the button to adjust volume.
Moves from one menu item to another vertically or adjusts selected menu values.
Power button [
Use this button for turning the PDP Display on and off.
Power indicator
Shows PowerSaver mode by blinking green
See PowerSaver described in the manual for further information regarding power
saving functions. For energy conservation, turn your PDP Display OFF when it is
not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the PDP Display.
Rear
Note
For detailed information concerning cable connections, refer to Connecting Cables under Setup. The
PDP Display's configuration at the back may vary slightly depending on the PDP Display model.
Note
This product is not compatible with MagicInfo.
SEL
]
Note
Introduction
Advertisement
Table of Contents
