Network Bridge Function; Projector Management Using Snmp - Hitachi CP-WU9100 User Manual

1.5 Network Bridge Function

This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
By using the NETWORK BRIDGE function, a computer connected to the projector
using wireless or wired LAN can control an external device using
RS-232C communication using the projector as a network terminal.
Computer
Wireless
LAN
CONTROL port
1.6 Other Functions
1.6.1 E-mail Alerts
The projector can automatically send an alert message to the specified using
addresses when the projector detects a certain condition requiring maintenance
or detected an error.

1.6.2 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) manages the projector
information, which is a failure or warning status, from the computer on the
network. The SNMP management software is required on the computer to use
this function.
TCP/IP data Protocol change
Wired LAN
LAN cable
LAN port
Serial data
RS-232C
RS-232C cable
WIRELESS port
(USB wireless adapter)
External device
5