Fillikid 4040 Manual page 5

EN
ASSEMBLY INSTRUCTIONS FOR THE LYING AREA
1. Take the Zipper to the hand.
2. Snap the zipper into place (see picture 1,2)
picture 1
3. Close the entire zipper around the travel cot. (see picture 3,4)
picture 3
4. Now secure the cover to the Velcro fastener. (see picture 5)
picture 5
MADE IN CHINA
picture 2
picture 4
Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
5. Then take two metal bars with different ends and put them in the pockets provided
and in each other. (see picture 6,7,8)
picture 6
picture 8
6. Finally lay the mattress on the lying surface. (see picture 9,10)
picture 9
MADE IN CHINA
picture 7
picture 10
Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
EN