Waves MaxxBCL Manual page 24

compression starts acting to a significant degree. The value is in dB below
0dBFS.
Compressor threshold range : 0 – 60 dB, step 0.1
Comp4Bass/Bass4Comp: Switches the order of the two processors in
the processing chain.
The L2 is always at the end of the signal chain, while the RenComp and
MaxxBass™ can be first or second in the chain. Therefore, you can arrange
them in 2 different signal paths:
•
•
Additionally, you have the option to bypass any (or all) of these proces-
sors.
Attack: Controls the response time of the compression onset. The value is
in milliseconds.
Options: 0.5, 1, 2, 5, 10, 15, 20, 50 ms
Compressor Attenuation Meter: Displays the compressor signal level at-
tenuation. Values are in dB below 0dBFS (Full Scale Digital).
Compressor Attenuation Meter Range: 0.0 – 12 dB
maxxBclManualFinal.indd 24
MaxxBass™4RenComp4L2
RenComp4MaxxBass™4L2
-or-
22
4/19/05 6:25:08 AM