Using The Test Tone; Setting The Audio - Samsung HT-TZ212 User Manual

USING THE TEST TONE

Use the Test Tone feature to check the speaker connections.
1.
In Stop mode, press the MENU button.
. Press the Cursor % button to move to Audio and then press the
ENTEr button.
.
Press the Cursor % button to move to TEST TONE and then press
the ENTEr button.
The test tone will be sent to L ➞ C ➞ r ➞ Sr ➞ SL ➞ SW in
~
order.
If the ENTEr button is pressed again at this time, the test tone
will stop.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.

SETTING THE AUDIO

You can adjust the balance and level for each speaker.
1. In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press the
ENTEr button.
. Press the Cursor % button to move to SOUND EDIT and then press
the ENTEr button.
4. Press the Cursor , button to select and adjust the desired item.
Press the Cursor , button to adjust the settings.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE ENTER RETURN EXIT
STOP
EXIT
MOVE ENTER RETURN EXIT
MOVE CHANGE EXIT
RETURN