Setting The Test Tone - Samsung HT-TP33 Instruction Manual

39P~72P(UP30/TP33)-GB

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.
In Stop or no disc
1
mode, press
MENU button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop
mode.
•
Use this function to check that each speaker is correctly
connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
51
3/14/05 10:41 AM Page 50
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
3
•
L: Front Speaker (L) C: Center Speaker
R: Front Speaker (R) SL: Rear Speaker (L)
Multi-Channel Pro Logic Mode
Start
Press Cursor button
to move to 'TEST
TONE' and then press
ENTER button.
The test tone will be sent to L
R RS LS SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
SW: Subwoofer
SR: Rear Speaker (R)
C