Setting The Speaker Mode - Samsung HT-DS110 Instruction Manual

33P~64P(DS110)-GB 9/16/04 9:31 AM

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
1
Press MENU button.
In the Speaker
3
Setup, press the
ENTER button again.
43
Page 44
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
Press Cursor
4 , buttons to move
to the desired
speaker and then
press ENTER button.
•
For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL
•
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
•
Depending on PRO LOGIC and STEREO, the speaker mode may vary.
, ,
NONE.
P . SCAN