Table of Contents
Advertisement
AUX2 : Connecting an External Analogue Component
Analogue signal components such as a VCR.
1.
Connect AUX IN 2 (Audio) on the back of the product to the Audio Out of the external Analogue
component.
•
Be sure to match the colours of the connecting jacks.
2.
Press the FUNCTION button to select AUX 2 input.
•
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ IPOD ➞ FM.
✎
NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to
this product.
To optimize the system operation after switching to AUX mode, the signal sound will be output in few seconds.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1.
Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the
external digital component.
2.
Press the FUNCTION button to select D.IN.
•
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ IPOD ➞ FM.
HT-C730-ELS_ENG-0607.indd 21
HT-C730-ELS_ENG-0607.indd 21
Connecting Audio from External Components
Audio Cable (not supplied)
If the external analogue
component has only one Audio
Out, connect either left or right.
White
Red
Optical Cable
(not supplied)
VCR
AUX 2
Set-Top Box
OPTICAL
21
English
2010-06-07
2010-06-07
9:43:25
9:43:25
Advertisement
Table of Contents
