Attaching The Toroidal Ferrite Core To The Power Cord Of - Samsung HT-C720 User Manual

Removing/Installing the speaker on the stand
* Front Speakers only
How to remove the speaker
If you attach the speaker on the wall, remove the stand
before using it.
1. Pull out the stand in the arrow direction as shown.
•
Be careful not to put excessive force when removing it.
Otherwise, it can be damaged.
2. This is the appearance after the stand is removed.
How to install the speaker
1. Connect the stand in the arrow direction so that it fi ts the
corresponding holes (x4) on the speaker.
2. Fully insert the stand in the arrow direction as shown.
3. This is the appearance after the speaker unit is installed.
Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit
If you attach a Toroidal ferrite core to the power cord of the man unit, it will help to
prevent RF interference from radio signals.
1. Pull the fi xing tab of the Toroidal ferrite core to open it.
2. Make a loop twice in the main unit power cord.
3. Attach the Toroidal ferrite core to the main unit power cord as the fi gure shows and press it until it clicks.
HT-C720-EUR_ENG-0607.indd 17 HT-C720-EUR_ENG-0607.indd 17
1
2
1
3
FM ANT.
Below 5cm
2
17
English
2010-06-07 2010-06-07 10:32:53 10:32:53