Samsung HT-D7200 User Manual page 24

Connections
HDMI Auto Detection Function
If you have connected your home cinema by HDMI cable, the home cinema's video output
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions,
see page 31.
•
This function is not available if the HDMI cable does not support CEC.
•
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
•
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted
via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
!
CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of
the product.
Composite Video (GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO
IN jack on your TV.
✎
NOTE

The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup
menu. (See page 31)

After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.

If you have set the product's remote control to operate your TV, press the TV SOURCE button on
the remote control and select VIDEO as the external source of the TV.
!
CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.
24
English
HT-D7200_ELS_1227.indd 24 HT-D7200_ELS_1227.indd 24
Video Cable
Video Adapter
2011-12-27 2011-12-27 3:28:03 3:28:03