Related Manuals for raumplus AIR-A S1200
Summary of Contents for raumplus AIR-A S1200
- Page 1 SLIDING DOOR: ASSEMBLY & INSTALLATION SYSTEM AIR-A / S1200 Version 1.4 (2018-09-13) easy medium difficult Installation...
- Page 2 CONTENT AND TOOLS CONTENT: Content and tools page Product information page Accessories page Exploded drawing page Cutting measures page Assembly instruction page Installation instruction page Detail drawings page Stopper for top track page TOOLS: Hack saw Screwdriver set (without claim of completeness) Allen key set Rubber mallet Cordless drill...
-
Page 3: Product Information
Please check the completeness of the delivered parts and check carefully if any transport damages are visible. If any parts are damaged or lost, please immediately contact the responsible supplier. It is assumed that you have exactly identified all cutting dimensions according to the measurement instruction for raumplus products. SYMBOLS: Symbol Importance... - Page 4 - body parts or objects gett in to the clothing edges or door runnings during use of the door wing. - the door system is not used as intended. Structural modifications structural modifications that are not offered as an accessory from raumplus may only be attached or installed with permission of raumplus GmbH!
- Page 5 MANUAL This manual is part of the delivered product and describes the safe and proper use. Designated use: The product is designed and manufactured for indoor use. The product was designed as a hand-held sliding door that is usually not moved faster than at walking pace and that is braked manually when reaching of the end position.
- Page 6 ACCESSORIES 1_ 10.06.027 2_ 10.06.200 3_ 10.07.215 4_ 10.06.033 / 10.06.035 25.01.2018 Modell:F:\Technik\CAD Standards\Inventor\Bibliothek\Beschlagteile\10.06.033_Grundplatte mit Kugellager System Air S34\10.06.033.iam Zeichnung:F:\Technik\CAD Standards\Inventor\Templates\Doku\Detail Zchng mit Schutzvermerk.idw 24.01.2018 Modell:F:\Technik\Dokumentation\Anleitungen\1 Air-System\1.03.x.x_Air-A S1200\InV_\10.06.027.iam Zeichnung:F:\Technik\CAD Standards\Inventor\Templates\Doku\Detail Zchng mit Schutzvermerk.idw 5_ 10.07.212 / 10.07.213 / 6_ 12.01.0xx 7_ 12.42.0xx 8_ 12.20.0xx 10.07.214...
-
Page 7: Exploded Drawing
EXPLODED DRAWING SYSTEM AIR-A / S1200 Item list Stückliste object quantity item item no. Objekt Anzahl Bezeichnung Artikel Nr. Bottom rail S1200 air 12.26.0xx Querprofil unten S 1200 Air 12.26.0xx Ground plate with bearing air S34 / Grundplatte mit Kugellagern S34 / S1200 System AIR 10.06.033 10.06.033 air S12000... - Page 8 DETAIL DRAWING HOLE PATTERN VERTICAL PROFILES / CUTTING MEASURES W/O SDB stile S1200 40,4 Art.Nr.:12.01.0xx item no.: 12.01.0xx 40,4 40,4 40,4 profile outside profile inside PROFILES PANEL CUTTING MEASURES S1200 AIR: CUTTING MEASURES S1200 AIR (w/o dividing rail): Door height = clear height -60 mm height = door height -16 mm (w/o gasket) Cross rail length...
- Page 9 DETAIL DRAWING / CUTTING MEASURES CUTTING MEASURES HEIGHT S1200 AIR Panel without gasket Panel with gasket...
- Page 10 ASSEMBLY INSTRUCTIONS DOOR PANEL / GASKET The gasket is necessary for glass panels under 10 mm. Begin in the center of the lower edge and pull the gasket around the panel. Cut the gasket just in front of the corner and pull around.
-
Page 11: Door Assembly
ASSEMBLY INSTRUCTIONS DOOR ASSEMBLY max. 3 Nm Put the panel on a flat work surface, optionally provided with a suitable gasket. Hit the top rail with a rubber hammer. Insert the pick-up-element laterally into the top rail. Put the vertical profile in the pick-up-element and hit the vertical profiles with a rubber hammer. Hit the bottom rail with a rubber hammer. -
Page 12: Assembly Instruction
ASSEMBLY INSTRUCTION ALIGN SLIDING DOOR Align the profiles with a rubber hammer and straight-edge. Sliding door S1200 AIR-A is completed. -
Page 13: Installation Instruction
INSTALLATION INSTRUCTION TOP TRACK 100 mm max. 500 mm 100 mm Screws and dowels for mounting the top track must be adapted to the respective ground. The loading capacity must be at least 60 kg per door. Cut cover for top track, middle insert profile and top track to size and drill holes in top track. notches must face upwards screws to the bottom... - Page 14 INSTALLATION INSTRUCTION ASSEMBLE PICK UP ELEMENT Top track is hidden to ensure a clear view of the installation situation. Connect pick up element with top roller. For larger systems, assemble the sliding doors with at least 2 persons. Put in the rear door, slide the top roller with the pick up element into the mounting rail and mount it.
- Page 15 INSTALLATION INSTRUCTION ADJUST SLIDING DOOR Center of rear top track insert Inner edge Level of stile Middle rear bottom rail Mark position of ground plate (masking tape / pencil), unhinge rear sliding door and mount ground plate. For larger systems, assemble the sliding doors with at least 2 persons.
- Page 16 INSTALLATION INSTRUCTION SECOND TOP TRACK notches must face upwards screws to the bottom front top track level brake for top roller stopper for top track w/o brake do not ca. 48,5 cm tighten yet. ca. 97 cm Insert accessories as illustrated If no wall stop exists it is before mounting top track.
- Page 17 INSTALLATION INSTRUCTION ADJUST SECOND SLIDING DOOR Center of front top track insert Inner edge of stile Level Mark position of ground plate (masking tape / pencil), unhinge rear sliding door and mount ground plate. For larger systems, assemble the sliding doors with at least 2 persons. Put in the front door, slide the top roller with the pick up element into the mounting rail and mount it.
- Page 18 INSTALLATION INSTRUCTION POSITION STOPPER Fig.: front door opened Designation of stopper position: Fig.: front door closed Open the door completely, move the stopper right to the top roller and mark the position. Before fixing, make a fine adjustment of the stopper. Stopper for top roller AIR Mount stopper for top roller AIR in both top track inserts at closing positions.
- Page 19 DETAIL DRAWING SECTION DRAWING S1200 AIR-A / S1200 AIR-A SLIDING DOOR BRAKE S1200 AIR-A S1200 AIR-A SDB Embedded in ceiling...
- Page 20 DETAIL DRAWING TRAVERSING DISTANCE / DISCHARGE PASSAGE door width clear width 26 mm passage width For muli-track systems, please always consider the overlap!
-
Page 21: Handle Options
DETAIL DRAWING HANDLE OPTIONS concave handle. Dividing rail... - Page 22 · raumplus GmbH Dortmunder Straße 35 · 25199 Bremen · Germany · Tel: +49 (0) 421 / 579 50 0 · Fax: +49 (0) 421 / 579 50 11 · www.raumplus.com...