Radio Operations - JVC KD-G825 Instructions Manual

Hide thumbs Also See for KD-G825:
Table of Contents

Advertisement

To check the current clock time when the
power is turned off
Changing the display pattern
Ex.: When tuner is selected as the source
Source operation display
"SMALL" (CD jacket image) graphic*
"LARGE" (full display size) graphic*
Audio level meter is displayed (see "LevelMeter" on page 17).
Goes back to the initial display pattern.
*
1
You can use your edited file for graphic screen
(see pages 19 – 22).
Depending on a downloaded file, it may take
a longer time to show it on the display.
*
The information bar will disappear if no
2
operation is performed for five seconds.

Radio operations

~
Ÿ
!
1
is displayed.
*
2
To tune in to a station manually
In step ! above...
1
1
is displayed.
2 Select a desired station frequency.
When an FM stereo broadcast is hard to
receive
1
Start searching for a station.
When a station is received, searching
stops.
• When receiving an FM stereo broadcast
with sufficient signal strength,
lights up on the display.
To stop searching, press the same button
again.
Continued on next page...
7

Advertisement

Table of Contents
loading

Table of Contents