Coaxial Power Cable For Robot; Type Of Coaxial Power Cables - Daihen OTC RT3500S Instruction Manual

4. Coaxial Power Cable for Robot

4.1 Type of Coaxial Power Cables

The coaxial power cable is to lead the wire and shield gas from the wire feeding unit, shock sensor
cable, and voltage detection cable (when DL W.P.S used) to the torch. Refer to the table below to
choose the coaxial power cable according to the manipulator that you use.
Type
L-10621
L-10622
L-10623
L-10624
L-10625
L-10626
L-10627
L-10628
L-10629
L-10630
L-10631
L-10635
L-10638
L-10641
L-10648
L-10651
Liner
Fig.4.1 Outline drawing of the coaxial power cable (For AII-V6/ AII-V6L exclusive use)
Shock sensor cable
Liner
Fig.4.2 Outline drawing of the coaxial power cable (For AII-B4/AII-B4L exclusive use)
Shock sensor cable
Liner
Fig.4.3 Outline drawing of the coaxial power cable (For AII-B4/AII-B4L DL W.P.S exclusive use)
Table 4.1 Type of coaxial power cables
Nominal
cable length
1.1 m
1.2 m
1.3 m
1.4 m
1.5 m
1.6 m
1.7 m
1.8 m
1.9 m
2.0 m
2.1 m
2.5 m
0.8 m
1.2 m
0.8 m
For AII-B4L DL W.P.S exclusive use
1.2 m
Shock sensor cable
Cable cover
Cable cover
Applicable manipulator
AII-V6
AII-V6(For 31°torch)
AII-V6L
AII-V6L(For 31°torch)
For AII-B4 exclusive use
For AII-B4L exclusive use
For AII-B4 DL W.P.S exclusive use
Nominal cable length
Power cable
Nominal cable length
Nominal cable length
Power cable
－25－
Remarks
●
●
●
●
●
●
△
●
△
△
●
●
●
●
●
●
,
△:Build-to-order
●:Standard
Gas hose
Power cable
Gas hose
Voltage detection cable
Gas hose