Selecting The Proper Brush; Cleaning And Maintenance; Cleaning; Maintenance - Grizzly ERB 550-3U Translation Of The Original Instructions For Use

Using the device:
Never move the brush across plas-
tic or other flooring material while it
is in operation.The brushes could
scratch or damage the surface.
We do not assume any liability for
damages in this case.
• Operate the device at walking speed.
• The arrow
indicates the brush's rotational direc-
tion.
• Always test the device in an inconspic-
uous area before using it on sensitive
floors.

Selecting the proper brush

For information on replacing the brush,
please refer to the "Assembly instructions"
section.
Nylon brush
(black, for stone/concrete,
Select this brush for removing persistent
lichenics and moss on robust grounds.
Steel brush ( 17):
Select this brush for removing weed,
lichenics and moss from small narrow
joints.
Nylon brush
(grey, for wood/WPC,
For removing weeds, lichens and moss on
wood or similar sensitive materials.
Use the steel brush/nylon brush
(black, for stone/concrete) on
robust surfaces only (road, pave-
ment) as it may damage and/or
scratch the ground.
on the spray guard
10):
18):
Cleaning and

maintenance

Always unplug the device before
working on it.
Any work that is not described
in these Instructions must be
carried out by a servicing agen-
cy authorized by us.
Danger of injury!

Cleaning

Do not jet water onto the trimmer
and do not clean it under flowing
water. This would result in the
danger of an electric shock and
the trimmer could be damaged.
Always keep the device clean. Do no
use cleaning agents and solvents.
• Clean the device, brush and splash
guard with a soft brush or cloth after
every use.
• Keep the louvres clean.
Maintenance
• Only use spare parts and ac-
cessories that have been sup-
plied or recommended by the
manufacturer.
• Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
• Always inspect the brush before
starting the device. Never use
damaged brushes. Replace any
damaged or worn brush.
GB
25