Animex AMX T48 Quick Start Manual

4in / 100mm
SAFETY CAP
HEIGHT REDUCTION
IF TOP LIP FOLDED
T - POST
(30in / 550mm)
REFER TO ELEVATION VIEW
WIRE & FIXING SPACINGS
(ADJUST & ADD MORE AS REQUIRED)
ABOVE GRADE
SIDE TO BE ENCOUNTERED BY ANIMALS
BELOW GRADE
6in / 150mm
SECTION VIEW
NOT TO SCALE
HEAVY DUTY ZIP-TIE OR WIRE & WASHER
T-POST
DRILL HOLE
0.75in / 20mm ø
ATTACHING & JOINING SECTIONS
SCALE 1:4
HORIZONTAL WIRE
(USE IF REQUIRED IN EXTEREME WIND OR DISTURBANCE AREAS)
6in / 150mm
OVERLAP ANIMEX®
12in / 300mm (min.)
OVERLAP ANIMEX® & CUT TO FIT TERRAIN
FREE-STANDING WILDLIFE FENCING : TEMPORARY
- AMX T48 / 1220 - BELOW GROUND INSTALLATION -
www.animexfencing.com
6ft / 1.8m
(ADJUST AS REQUIRED)
T - POST
TOP LIP FOLDED OVER
SAFETY CAP
FIXINGS
40in / 1000mm
AMX P48/ 1220
(BOTTOM LIP SCORE LINE NOT FOLDED)
ELEVATION VIEW
NOT TO SCALE
3ft / 900mm
USE FIXINGS AS REQUIRED TO ENSURE
SECURE JOIN & NO GAPS
UP & DOWNHILL
NOT TO SCALE
info@animexfencing.com
ON A3 SIZED ORIGINAL (MM) 0 10 20 30
WIRE CLIP WASHER & TIE
BACK FRONT BACK FRONT
(OR)
FASTEN TOP LIP IF REQUIRED
REMOVE EXTRA POST
MATERIAL IF REQUIRED
ABOVE GRADE
BELOW GRADE
6in / 150mm
PERFORATED ANIMEX® BARRIER
(OPTIONAL)
CORNERS & TURN-AROUNDS
NOT TO SCALE
NOTES:
This specification should be used to
aid installation. Measurements are
accurate but may need to be adjusted
dependent on location, conditions
and local authority recommendations.
40 50
DRAWING NO.
AMX T48
AMX T1220