ARROWELD ARW-HMR Instruction Manual

DIGITAL LEEB HARDNESS TESTER
Model: ARW-HMR
Table of content
1. Overview
1.1 HMR Advantages
1.2 Main Application & Testing Range
1.2.1 Main Application
1.2.2 Testing Range
1.3 Configuration
1.4 Working Conditions
2. Structure Feature & Testing Principle
2.1 Structure Feature
2.1.1 Hardness Tester Appearance
2.1.2 Parts of the Main body
2.1.3 D Type Impact Device
2.1.4 Different types of Impact Devices
2.2 Leeb Hardness Testing Principle
3. Technical Specifications
4. Preparation & Testing
4.1 Preparation and Inspection before Testing
4.1.1 Preparation of Sample Surface
4.1.2 System Setting
4.1.3 Presetting Testing conditions
4.2 Testing Program
4.2.1 Start-up
4.2.2 Loading
4.2.3 Localisation
4.2.4 Testing
4.2.5 Reading the Measured Value
4.2.6 Power Off
5. Advice
6. Operation in Details
6.1 Power On
6.2 Power Off
6.3 Testing
6.3.1 Full description of the Main Display
6.3.2 Testing Operation at the Main Display
6.3.3 Key Operation at the Main Display
6.4 Menu Structure
6.5 Test Set
AS, 02.12.2010
Instruction Manual
ARW-HMR
6.5.1 Impact Direction Setting
6.5.2 Average Times Setting
6.5.3 Material Setting
6.5.4 Hardness Scale Setting
6.5.5 Tolerance Limit Setting
6.5.6 Hardness / б b Setting
6.6 Print Set
6.7 Memory Management
6.7.1 View from No.1 Group/ View from Ending Group
6.7.2 View from Selected No. Group
6.7.3 Data Transfer
6.7.4 Delete by Group No.
6.7.5 Delete all Data
6.7.6 Deletion Confirmation
6.8 Browsing Memory Data Groups
6.9 System Reset
6.9.1 LCD Brightness Setting
6.9.2 Date/ Time Setting
6.10 Software Information
6.11 System Calibration
6.12 EL Background Light
6.13 Auto Power Off
6.14 Battery Replacement
6.15 Connection of Data Transmission Cable
7. Fault Analysis & Fault Clearance
8. Servicing & Maintenance
8.1 Impact Device Servicing
8.2 Normal Maintenance Program
9. Calibration
10. Transport and Storage Conditions
11. Declaration of Conformity
APPENDIX
Table 1
Table 2
Table 3
Table 4
1. Overview
1.1 HMR Advantages







HMR GB
ARROWELD ITALIA Spa
Via M. Pasubio, 137
36010 Zanè (VI)-(Italia)
Tel +39 0445 492313
Fax +39 0445 491365
E-mail:info@strumentieservizi.com
Wide measuring range based on the principle of
Leeb Hardness testing theory. Leeb Hardness of
all metallic materials can be measured.
Large screen (128 x 64 dot matrix LCD) showing
all functions and parameters.
Testing at any angle, even upside down
With EL background light
Direct display of hardness scales HRB, HRC,
HV, HB, HS, HL
Seven impact devices are available for special
applications. Automatical identification of type of
impact devices
Large capacity memory can store 500 groups,
information including single measured value,
mean value, testing date, impact direction,
impact times, material, hardness scale etc.
Page 1 of 13