Download Print this page
Delta Compel 561LF Series Manual

Delta Compel 561LF Series Manual

Single handle lavatory centerset and vessel faucets

Advertisement

Quick Links

Models/Modelos/Modèles
561LF & 761LF
Series/Series/Seria
Compel
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and
maintenance information.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
www.deltafaucet.com
SINGLE HANDLE LAVATORY
72544
CENTERSET AND VESSEL FAUCETS
LLAVES MONOCONTROL DE MONTURA DE
CENTRO Y DE RECIPIENTE PARA LAVAMANOS
ROBINETS À UNE MANETTE POUR BASSIN
DE COMPTOIR ET
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
72544
1
ENTRAXE COURT
T E FLO N
1/8"
3/5/12
Rev. A

Advertisement

loading

Summary of Contents for Delta Compel 561LF Series

  • Page 1 • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information. 1/8" Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
  • Page 2 MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
  • Page 3 For Three Hole Mount For Single Hole Mount Para Las Instalaciones De Tres Agujeros Para Las Instalaciones De Un Agujero Montage Sur Trois Trous Montage sur un trou For three hole mount: For single hole mount: Slide escutcheon (1) and 3 hole gasket (2) up over tubes and Slide single hole gasket (1) and base (2) up over tubes and mounting stud.
  • Page 4 Los accesorios (1) son de compresión de no cortar el tubo demasiado corto. Delta no se responsabiliza por las tuberías que se han de 3/8”, con los extremos de color rojo para el agua caliente y azul l La tubería está...
  • Page 5 Incorrect Installation Correct method Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el Custom Fit Connections - Plastic Sleeve Installation Instructions boca abajo. corte esté recto. 1.
  • Page 6 Pop-Up with Metal Flange and Plastic Tail Piece With pivot (1) facing toward faucet, pull pop- Remove stopper (1), brass nut & washer (2), black Remove pivot nut (1). Install horizontal rod (2) up straight down into drain hole and secure and stopper (3) as removable (4) or non- gasket (3) and tail piece (4).
  • Page 7 Step 3b Metal Pop-Up Step 3c Remove stopper (1) and flange (2). Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal body (2) into sink. Screw flange (1) into body (2). rod (2) and stopper (3) as removable Screw nut (1) all the way down.
  • Page 8 Remove stream shaper (1) using supplied wrench (2) and turn Check all connections at arrows for leaks. Retighten if necessary, faucet handle (3) to the full on mixed position. Turn on hot and but do not overtighten. cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts.
  • Page 9: Maintenance

    Maintenance B. SHUT OFF WATER SUPPLIES. Replace valve If faucet exhibits very low flow: When reinstalling parts, make sure bonnet nut (7) cartridge (6). When reinstalling parts, make A. Remove and clean stream shaper (1) with is tightened securely with a wrench.* sure bonnet nut (7) is tightened securely with a supplied wrench (2).
  • Page 10 Model / Modelo / Modèle 561LF RP72997s RP72995s Button Handle, Button & Screw Botón sSpecify Finish Manija, Botón y Tornillo Bouton Especifíque el Acabado Manette, Bouton et Vis Précisez le Fini RP72998 Screw Tornillo RP54975 RP54972s O-Ring Anillo “O” Casquillo Joint Torique Embase RP61043...
  • Page 11 RP38958 Pop-Up Assembly Less Lift Rod Ensamble del Desagüe Automático sin la barra para alzarlo Renvoi mécanique sans la tirette RP5648 Stopper Tapón Bonde Metal Flange Brida de Metal RP12516 Collerette en métal Strap & Screw Barra Chata y Tornillo Feuillard et Vis RP6142 RP33038...
  • Page 12 Model / Modelo / Modèle 761LF RP72997s RP72995s Button Handle, Button & Screw Botón Manija, Botón y Tornillo Bouton Manette, Bouton et Vis RP72998 Screw sSpecify Finish Tornillo Especifíque el Acabado Précisez le Fini RP54975 RP54972s O-Ring Anillo “O” Casquillo Joint Torique Embase RP61043...

This manual is also suitable for:

Compel 761lf series