Choosing A Connection - Samsung DVD-E232 User Manual

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for
more information on those particular components.
Connection to an Audio System
Method 1
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
DVD
PLAYER
e.g) DVD-E435
Mixed Audio Out
An Example of Connecting DVD with Other Equipment
DVD Player + 2ch Stereo
Method 1
Amplifier or Dolby Pro Logic Decoder
DVD Player + Amplifier with 5.1ch
Method 2
Analog Input Jacks
DVD Player + Amplifier with Dolby
Method 3
Digital Decoder/DTS Decoder/MPEG-2
18
Method 2 Method 3
5.1ch Analog Amplifier Dolby Digital Decoder
Audio Input Jacks Digital Audio Input Jacks
Analog Audio Out Digital Audio Out
(DVD-E335/DVD-E435)
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
TV
DVD
PLAYER
OR
e.g) DVD-E435
Audio Output Jacks
Method 1 DVD Player + TV with Video Input Jack
Method 2 DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Scart Input Jack (Audio & Video)
Method 3
(If Scart jack is selected in the VIDEO OUT SELECT.)
NOTE
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
ENG ENG
Choosing a Connection
Method 1
Method 2
Good Better
Basic Audio
picture picture
S-Video
AV Cable
Cable
OR
Video Output Jack S-Video Jack
Method 3
Best
picture
Scart Cables
(not included)
OR
Scart Jack
19