Table of Contents
Advertisement
When disposing of a Hypro Cleanload, be sure to remove all fluids from the Cleanload before scrapping. These fluids
should be disposed of in a manner which complies with local and national regulations. Never dump fluids onto the ground.
Once the pump is free of all fluids, it may be scrapped in accordance with local and national laws.
Always flush the Cleanload with clean water after each day's use, if switching chemicals, or if the system is going to be
inactive for an extended period of time. Ensure that the components of the Cleanload are free of any chemical buildup or
residue, both inside and out. Failing to properly clean the system could lead to reduced performance and component life.
Be sure to thoroughly clean the eductor, ball valves, and internal components in the hopper. Cycle the ball valves open
and close during rinsing to ensure they are clean.
•
Each system's maintenance cycle will be exclusive. If system performance decreases, check immediately.
•
Duty cycle, temperature, quality, type of fluid being pumped, and inlet feed conditions all affect the life of Cleanload
assemblies and service cycle.
•
Label partial containers "seal is broken".
•
No sharp objects.
Maintenance, Routine Servicing, and Inspection
PREVENTATIVE MAINTENANCE CHECK-LIST
Check
Water Leaks
Plumbing
Disposal
Cleaning
Daily
Weekly
X
X
- 9 -
Yearly
Advertisement
Table of Contents
