Selecting The Sound Mode - Samsung WS-28M204D Owner's Instructions Manual

Selecting the Sound Mode

English - 46
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual I/II
Stereo
Stereo
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to MONO.
◆ If the stereo signal is weak and automatic switching
occurs, switch to MONO.
◆ When receiving mono sound in AV mode, connect to the
"AUDIO-L" input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
➢
DTV mode
When press the
DUAL I-II button
Mono
Mono
Stereo
Stereo
Dual I
Dual Mono
On-screen indication
MONO (Normal use)
MONO ↔ MONO
NICAM
STEREO ↔ MONO
NICAM
Dual I → Dual II → MONO
NICAM NICAM
MONO (Normal use)
DUAL I ↔ DUAL II
STEREO ↔ MONO
After changing channels
(Default Mode)
Mono
↔
Mono
Stereo
→
Dual II
Dual I
Dual
(Normal)
(Normal)
(Normal)
(Forced mono)
On-screen
indication
Mono
Stereo
Dual I