Plug & Play Feature - Samsung CW-29M066V Owner's Instructions Manual

ENG
Plug & Play
Ant. Input : Check
TV
Country : Others
Search : -/+
TV
Clock
Timer
ENJOY YOUR WATCHING
TV
Plug & Play
Language
Blue screen
Demonstration
Tilt
Plug & Play Feature
Auto store
Time
: -- : --
: Off
Setup
√ √
√ √
: On
√ √
: 0
12
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for
a little while and then Language menu is automatically
displayed.
2
Select the appropriate language by pressing the
Press the MENU button to enter the language.
Result: The message Ant. Input : Check is displayed.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3
Make sure that the antenna is connected to the TV. Press the
+
button.
Result: The Auto store menu is displayed with Country is
selected.
4
Select your country by pressing the
channels, select Search by pressing the
- +
press the or button. Press the MENU button to stop the
search.
Result: The Time menu is displayed with Clock is selected.
Refer to "Storing Channels Automatically" on page 14.
- +
5
Press the or button to move to the hour or minute. Set the
hour or minute by pressing the
Refer to "Setting and Displaying the Current Time" on page
30.
6
When you have finished, press the MENU button.
Result: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1 Press the MENU button.
2 Press the or
+
or button.
Result: The Plug & Play is selected.
- +
3 Press the or
Result: This feature starts with the message Plug & Play
is displayed.
- +
or button. To search the
or
or button.
button to select Setup, and then press the
button again.
or button.
-
or
button, and then
-