Using the LNA (Low Noise Amplifier) feature
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
and that is memorized on current channel, additional.
1
Press the MENU
(
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
2
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
Press the ▲ or ▼ button to select LNA.
4
5
To activate this feature, select On by pressing the œ or √ button.
➢
Setting the LNA option to "On" may produce worse picture
quality due to the current channel's signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU (
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
2
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
Result:
The Mode is selected.
4
Select the required picture effect by pressing the œ or √ button
repeatedly.
Result:
The following picture effects are available:
Dynamic - Standard - Movie - Custom
➢
You can also set these options simply by pressing the
P.MODE(
; Picture Mode) button.
)
button.
) button.
) button.
) button.
(depending on the model)
TV
...
...
More
Fine Tune
LNA
œ œ √ √
Move
Adjust
TV
Mode
Custom
Color Tone
Size
Scan Mode
†
†
More
œ œ √ √
Move
Adjust
English - 21
Channel
√ √
œ œ On
√ √
Return
Picture
œ œ Dynamic
√ √
√ √
: Normal
: Normal
: Natural
Return