Sharp SJ-TA03ITXL1-EU User Manual page 10

CHAPTER -3: USING YOUR FRIDGE FREEZER
Accessories
Ice tray
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely turned into ice, you can twist the tray as shown below to remove the ice cubes.
Fresh dial
If you want to keep your vegetables longer in that compartment, you
have to change the humidty controller that is located at the front of the
crisper, to closed position. With the aid of this function, humidty level
in the crisper compartment, will stay constant and vegetables will last
longer.
If you want to keep your vegetables colder in that compartment, you
have to change the humidity controller to open position. By doing this
change, you will allow the cold air to enter the crisper compartment. As
a result of this, your vegetables will be colder.
If you see any condensation on the glass shelf that is located at the
top of crisper, you can change the humidity controller to open position.
Adapti-Lift Door Shelf
Fig.1
Note: Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf
could fall off the rails due to the weight. So damage may occur on the door shelf or rails.
Visual and text descriptions on the accessories section may vary according to the model.
Cleaning
• Make sure to unplug the fridge before cleaning.
• Do not wash your fridge by pouring water .
• You can wipe the inner and outer sides with a soft cloth or a sponge using warm and soapy water.
• Remove the parts individually and clean with soapy water. Do not wash in washing machine.
• Never use flammable, explosive or corrosive material like thinner, gas, acid for cleaning.
• You should clean the condenser with broom at least once a year in order to provide energy saving and increase
the productivity.
Make sure that your fridge is unplugged while cleaning.
Six different height adjustments can be made to provide storage
areas that you need by Adapti-Lift.
To change the position of Adapti-Lift ;
Hold the bottom of the shelf and pull the buttons on the side of
the door shelf direction of arrow (Fig.1)
Position door shelf the height you need by moving up and down.
After you get the position that you want the door shelf, release
the buttons on the side of the door shelf (Fig.2) Before releasing
the door shelf, move up down and make sure the door shelf is
fixed
EN -8-
Fresh dial
Fig.2