ENG
Plug
Ant. Input Check
Auto Store
P 1
471 MHz
Exit
Time
Clock
Move
Exit
ENJOY YOUR WATCHING
Language
Time
Plug & Play
Blue Screen
Child Lock
Demonstration
Select
Enter
Plug & Play Feature
&
Play
Exit
48 %
11 : 35
AM
Function
:
English
√
√
:
Off
√
√
Exit
12
(depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER (
on the remote control.
Result:
The message
little while and then the "Language" menu is automatically
displayed.
Press the ▲ or ▼ button to select required language. Press the
2
MENU button to enter the language, and then the message
is displayed.
Input Check
➣
If any language is not selected on the
menu will be displayed about 30 seconds later.
Language
3
Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to "Storing the
Channels Automatically" on page 14).
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the
displayed.
5
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to "Setting and
Displaying the Current Time" on page 30).
6
When you have finished, press the MENU (
Result:
The message
then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the MENU button.
Press the ▲ or ▼ button to select the
2
press the œ or √ button.
3
Select the
Plug & Play
then press the œ or √ button.
Result:
The message
is displayed. It flickers for a
Plug & Play
Language
Time
) button.
is displayed, and
ENJOY YOUR WATCHING
Function
by pressing the ▲ or ▼ button, and
is displayed.
Plug & Play
) button
Ant.
menu, the
menu is
, and then