Selecting The Sound Mode (Depending On The Model) - Samsung CS-15K10MJ Owner's Instructions Manual

KS1A(TM75)ENG_asia(03121A)
ENG
11/6/03 11:29 AM
Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either "Dual-I" or "STEREO", depending
on the current transmission.
➣
22
Page 22
(depending on the model)
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO position using the
DUAL I-II button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the MONO
mode.
◆ When receiving mono sound in the AV mode, connect to
the "L" input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
DUAL I-II button.
On-screen indication
MONO (Normal use)
↔
MONO MONO
NICAM (Normal)
↔
STEREO MONO
NICAM (Normal)
→ →
Dual-I Dual-II MONO
NICAM NICAM (Normal)
MONO (Normal use)
↔
Dual-I Dual-II
↔
STEREO MONO
(Forced Mono)