Advertisement
gimbals are used. The GH30C is also capable of smooth, controlled movements. Apply some
tension using the Arm Tension Control Knob (1) and the Pan Base Tension Control Knob (11) to
slow down and control the movements in a fluid-like fashion. Use different amounts of tension on
these controls to achieve your desired movement or lock one in place to isolate movement to just
the other. Use the Smooth-control Handle (9) to apply movement to the GH30C in the most
controlled fashion. This is especially useful when capturing video footage and when using smaller,
lighter-weight cameras, lenses, or camcorders which lack the mass to create much leverage.
Operational Tips
1. The GH30C is rated with a maximum load capacity of 33 lbs / 15 kg. This assumes a
properly balanced load. If the camera and lens are not properly balanced there is a danger
of tipping and falling which could lead to damage to your equipment or to you person.
Always be sure to properly balance your rig.
2. Be advised that while the GH30C can handle a load up to 33 lbs / 15 kg your tripod, to
which the GH30 is attached, must also be able to handle this load, including movements you
will apply to the rig via the gimbal (swings and pans).
Here are some tips to help ensure a stable tripod setup:
-
If possible, attach the GH30C directly to the column platform of your tripod. Do not connect
the GH30C to a ball head or pan/tilt head as this will greatly reduce stability.
-
Always use the tripod's legs to achieve your desired working height rather than its column.
Only extend the column if absolutely necessary. Extending the column of the tripod greatly
reduces stability.
-
If your tripod has multi-angle legs and you can achieve your desired working height with
the legs set at a wider angle, thereby creating a larger base, do so. This improves stability.
-
Always be sure your tripod is level even if the ground it is placed on is not. Use the leg
adjustments to achieve a level state for the gimbal before mounting your camera and
balancing it.
3. Cold weather performance is only a guide. The GH30C's performance in cold weather can
be affected by moisture as well as temperature and load. With increased in moisture
and/or decreases in temperature you will notice the GH30C's movements begin to slow
down as the unit's joints become stiff. In this case you may want to be sure all of the tension
adjustments on the GH30C are set to their loosest setting to regain movement. If possible,
do your best to keep the GH30C dry to prevent moisture from affecting performance.
ONE YEAR UNCONDITIONAL WARRANTY
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this
product to your ProMaster dealer and it will be exchanged for you at no charge. ProMaster
products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at
any time after one year, your ProMaster product fails under normal use, we invite you to return it
to ProMaster for evaluation.
Code 2544
Made in China
WWW.PROMASTER.COM | FAIRFIELD, CT 06825
Advertisement
