Inserting The Batteries In The Remote Control; Connecting The Aerial (Or Cable Television Network); Connecting A Vcr - Samsung CB-14Y4T Owner's Instructions Manual

I I
I I
nserting the Batteries in the Remote Control
You must insert or replace the
batteries in the remote control
when you:
◆ Purchase the television
◆ Find that the remote control is
no longer operating correctly
C C
C C
onnecting the Aerial (or Cable Television Network)
To view television channels
correctly, a signal must be received
by the set from one of the
following sources:
◆ An outdoor aerial
◆ A cable television network
C C
C C
onnecting a VCR
Depending on your model, you can
connect a VCR to the television
using a:
◆ Coaxial cable
◆ SCART audio/video cable
◆ RCA audio/video cable
4 4
4 4
1
Remove the cover of the remote control by
pressing the symbol ( ) and pulling the
PRESS
cover in the direction of the arrow.
1
Rear of the TV
(depending on the model)
Plug the aerial or cable network input cable
into the socket (marked 75 Ω) at the bottom
of the television's rear panel.
1
Rear of the TV
(depending on the model)
Plug the aerial input cable into the appro-
priate socket on the VCR.
Connect a coaxial cable to the:
◆ VCR aerial output socket
◆ Television aerial input socket
(marked 75 Ω)
2
Insert AA or equivalent type batteries,
taking care to respect the polarities:
◆
+ on the battery with + on the remote
control
◆
- on the battery with - on the remote
control
Replace the cover by pushing it in the
direction of the arrow.
Aerial
or
Cable
Television
Network
Aerial 2
(depending on the model)
or
Cable
Television
Network
To obtain better picture quality and simplify
the setting up of the VCR, you can connect
an audio/video cable between:
◆ The AV (SCART or RCA) output socket
on the VCR
and
◆ The AV (SCART or RCA) input socket
on the rear of the television
Follow the instructions supplied with your
VCR to tune the VCR to your television.
Rear of the TV