Inserting The Batteries In The Remote Control; Connecting To An Aerial Or Cable Television Network - Samsung CS34A10 Owner's Instructions Manual

S58A_UK(02796A-01) 10/30/03
ENG
Rear of the TV
10:16 PM Page 10

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when
you:

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by
the set from one of the following sources:
or
Cable Television
Network
10
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
◆
+ on the battery against + on the remote control
◆
- on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆
"Storing Channels Automatically" on page 16
◆
"Storing Channels Manually" on page 17