Wall- mount adjustment (Sold separately)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Rear Panel
Serial Cable(1P to 1P)(Not supplied)
Entering the menu
1
Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
➢
If the Wall Mount Adjustment screen is not displayed when
➢
clicking on a direction button while watching your TV, use the
menu to display that screen.
• Press the MENU button to display the menu. Press the ▲ or ▼
button to select Setup, then press the ENTER button.
• Press the ▲ or ▼ button to select Auto Wall-Mount, then press
the ENTER button.
Remembering the Position
Adjust to the desired position using the ▲, ▼, ◄, ► buttons.
If you press an arrow button when no OSD is displayed on the
➢
TV screen, the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to
➢
select Yes, then press the ENTER button. The position is
initialized to the default setting.
Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position1, Position or Position in order to save the current
position.
To not save the current position, press the RETURN button.
➢
When selecting a save mode, you cannot use the Colour buttons.
➢
4
Press the ENTER button to save.
When Position1 is selected, the message Current position
➢
saved as Position1 is displayed.
5
Press the ENTER button.
The saved Position appears on the left side of the OSD.
➢
English - 4
Auto Wall-Mount
T V
Setup
Plug & Play
Language
: English
Time
Light Effect
: In Standby
Auto Wall-Mount
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move
Enter
Auto Wall-Mount
Position1
Position
1
Adjust
Save
Save
Select a mode to Save.
Position 1
Position 2
Position 3
Enter
Adjust
Continued...
Return
Center
INFO
Return