Auto Wall-Mount Adjustment (Sold Separately) - Samsung PS50A756T Manual

Auto Wall-Mount Adjustment (Sold separately) (Depending on the model)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
Rear Panel
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
N
If the Auto Wall-Mount screen is not displayed when clicking on a direction
N
button while watching your TV, use the menu to display that screen.
- Press the MENU button to display the menu. Press the ▲ or ▼ button to
select Setup, then press the ENTER E button.
- Press the ▲ or ▼ button to select Wall-Mount Adjustment, then press
the ENTER E button.
Remembering the Position
. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on the TV screen,
N
the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to select Yes,
N
then press the ENTER E button. The position is initialized to the default
setting.
3. Press the blue button. Press the ▲ and ▼ buttons to select a save mode from
either Position 1, Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
N
When selecting a save mode, you cannot use the Colour buttons.
O
4. Press the ENTER E button to save.
When Position1 is selected, the message Current position saved as Position1 is displayed.
N
5. Press the ENTER E button.
The saved Position appears on the left side of the OSD.
N
Moving to the remembered position
1. Complete Step 1 of Entering the menu.
. Pressing a Colour (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
You can move the wall mount to one of the 3 pre-set positions by pressing
N
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
If you adjust the Position after moving to a pre-set position, the position
N
display will disappear.
For installation, refer to the Installation Manual provided with the wall mount.
N
For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation
N
company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials,
N
please contact your nearest dealer.
The auto wall mount will not work when Anynet + or WISELINK Pro is operating.
N
Serial Cable(1P to 1P)(Not supplied)
English - 3
Auto Wall-Mount
Digital Text
Light Effect
Wall-Mount Adjustment
Melody
Entertainment
Energy Saving
PIP
Software Upgrade
Common Interface
Wall-Mount Adjustment
Position 1  3
Adjust Save
Save
Select a mode to save.
Position1
Position
Position3
Move
: Enable
: Watching TV
►
: Off
: Off
: Off
Centre
Enter Return