Input Mode (Pc/Dvi) - Samsung PS42PNSB Owner's Instructions Manual

Input Mode (PC/DVI)

Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Standard Dot x Line
VGA 640 x 480
720 x 400
SVGA 800 x 600
XGA 1024 x 768
WXGA 848 x 480
N The interlace mode is not supported.
N The PDP might operate abnormally if a non-standard video format is selected.
N The 4:3 mode does not work with input signals from "720 x 400".
N The DVI mode does not support "1024 x 768" (85Hz).
Notes
N The text quality of PC screen is optimum in the VGA mode (640 x 480), the full size displayed PC mode
is optimum in the SVGA mode (800 x 600).
N When this PDP is used as a PC display, 24-bit color is supported (over 16 million colors).
N Your PC display screen might appear different depending on the manufacturer (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a PDP.
N If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).
In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned
off (or if the PC is disconnected). If so, press the Source button to enter the Video mode. Also, make sure that
the PC is connected.
N When connecting a notebook PC to the PDP, make sure that the PC screen is displayed through only the
PDP monitor (Otherwise, random signals might appear).
N When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable
connections.
Vertical Horizontal
frequency (Hz) frequency (kHz)
85.0 43.3
75.0 37.5
72.8 37.9
59.9 31.5
70.1 31.5
85.1 53.7
75.0 46.9
72.2 48.1
60.3 37.9
56.3 35.2
85.0 68.7
75.0 60.0
70.1 56.5
60.0 48.3
85 42.9
75 37.5
72 36.1
70 35.0
60 29.8
Vertical Horizontal
polarity polarity
N N
N N
N N
N N
P N
P P
P P
P P
P P
P P
P P
P P
N N
N N
P N
P N
P N
P N
P N
(N: Negative / P: Positive)
51
ENG