Bradford White M-2-XR75S Specification Sheet

Residential Atmospheric Vent Extra Recovery
Energy Saver Gas Water Heater
Photo is of
M-2-XR65T6FBN
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Defender Safety System ® , ScreenLok ® , Vitraglas
The Extra Recovery FVIR Defender Safety System
Advanced ScreenLok
arrestor is designed to prevent ignition of flammable vapor outside of the water
heater.
Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of
the combustion chamber or restricted air flow.
Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
Pedestal Base—Rugged and durable base allows easy transport, positioning
and provides corrosion resistant contact with floor.
Maintenance Free—No regular cleaning of air inlet openings or flame arrestor
is required under normal conditions.
Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
Factory Installed Hydrojet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour delivery of hot water while minimizing temperature build up in tank.
Vitraglas
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
The Bradford White high silica Vitraglas
for our hot water tanks.
Fully Automatic Controls—Built-in energy cut-off switch prevents
abnormally high water temperature for extra safety. Built-in gas pressure
regulation.
Side Connections—3/4" NPT tappings allow easy connections for space
heating applications (potable water only).
2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity (M-1-XR403 has 1").
Water Connections—3⁄4" NPT factory installed true dielectric fittings extend
water heater life and eases installation.
Factory Installed Heat Traps—Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
3x4 "Snap Lock" Draft Diverter—Allows either 3" or 4" vent connections
with inputs of 40,000 BTU/Hr. or less. Over 40,000 BTU/Hr. has the 4" "Snap
Lock" Draft Diverter.
Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
T&P Relief Valve—Included.
Brass Drain Valve.
Design Certified by CSA International (formerly AGA/CGA).
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
® and Hydrojet ® are registered trademarks of Bradford White
® Technology Flame Arrestor Design—Flame
® Total Performance System—Cold water inlet
® Lining—Bradford White water heater tanks are protected from the
® Corporation.
®

Models Feature:

® lining provides a tough interior surface
109-B-0808-A