en Installation instructions
Open the filter cover.
2.
Grasp the front corners of the filter cover and
‒
pull it down in a single, swift motion.
Undo the hinge lock and remove the filter cover.
3.
Remove the grease filters.
4.
To avoid causing damage, do not bend the grease
filters.
Undo the control panel cabling and cabling for the
5.
lighting.
6.
Undo the screws in the frame
frame
.
14
and remove the
Preparing circulating-air mode
Position the filter retainer correctly on the motor
1.
and turn it to the front until it clicks into place
Slide the odour filter into the filter retainer.
2.
Installing the appliance
Insert the appliance into the opening in the fitted
1.
unit
and screw it to the fitted unit
Tighten the fastening screws.
2.
Attach the frame and screw it to the appliance from
3.
below.
.
.