BLUETOOTH®
Connect with a remote device by One-touch (NFC)
Near Field Communication (NFC) enables short-range wireless
communication between the unit and remote devices.
By holding an NFC-compatible remote device near to the N-Mark on
the unit, the unit and remote device proceed to complete pairing and
established the BLUETOOTH connection automatically.
1
Activate the NFC function on the remote device.
Refer to the instruction manual of the remote device for more
information.
2
Hold the remote device near to the N-Mark on the unit.
The device vibrates when pairing is completed.
• To disconnect, hold the remote device near to the N-Mark on the unit
again.
• This unit only can recognize and connect to one NFC-compatible device
at a time.
14
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a
selected time. ( 15)
During a call:
• The display illuminates according to the settings made for [DISPLAY]
( 21) and ZONE 2 illuminates in green color.
• If you turn off the unit, the Bluetooth connection is disconnected.
Autogoods "130"