Troubleshooting - Nintendo FUSION PRO User Manual

SETUP (ENGLISH)
RECHARGEABLE 900 MAH INTERNAL BATTERY
Controller was charged at the factory, but if top LED is flashing red, plug in USB cable to
charge prior to initial pairing. Get up to 30 hours of game play when fully charged (other
variables affect play time).
NOTE: Remember to charge controller at least once every 45-60 days (regardless of use)
so battery retains ability to charge. Battery capacity will gradually reduce over time with
repeated charging.
WIRELESS PAIRING
From the HOME Menu, select 'Controllers,' then 'Change Grip and Order.' While the
following screen is displayed, press and hold down the SYNC Button for at least one
second on the controller you wish to pair.
NOTE: After controller is paired once, it will autoconnect next time.
UNDERSTANDING LED INDICATORS
1. The top LED near the USB port will flash red when the internal battery is near
depletion. Plug in USB cable to charge once indicator is flashing for uninterrupted
game play. LED will turn solid red during charging, and off once fully charged.
2. The front LED (between Capture and Home buttons) will flash during programming of
Advanced Gaming Buttons.
3. The four LEDs on the bottom indicate Power & player number 1-8, and will cycle from
left to right during wireless pairing.

TROUBLESHOOTING

For latest FAQs, visit PowerA.com/Support
PROBLEM: My FUSION Pro Wireless Controller is not pairing.
SOLUTION:
Confirm batteries are charged by plugging in USB-C cable.
SOLUTION: Confirm you are following the 'Wireless Pairing' process.
SOLUTION: Insert paper clip into Factory Reset Hole as marked above to reset controller
to factory settings.
BATTERY WARNING - CAUTION
• Don't attempt to replace the rechargeable battery yourself. There is a serious risk of
explosion if the battery is incorrectly replaced.
• The lithium-ion battery in your device should be serviced or recycled by PowerA, or an
authorized provider and must be recycled or disposed of separately from household
waste. Dispose of batteries according to your local environment laws and guidelines.
• Disposal of a battery or a controller that contains batteries into a fire, or
mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery or a controller that contains batteries in extremely high-temperature
environment can result in an explosion or leakage of flammable liquid or gas.
• A battery or controller that contains batteries that is subjected to extremely low air
pressure may result in an explosion or leakage of flammable liquid or gas.
• Don't use the rechargeable battery in a location where there is a lot of static electricity,
as the internal safety functions may be damaged, causing a dangerous situation.