Samsung PS63B680T6W User Manual page 66


The Anynet+ menu changes depending on the type and status of the Anynet+ devices
connected to the TV.
Option
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording : (*recorder)
(*recorder) Reserve
Recording
Stop Recording:
(*recorder)
Receiver
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet + Device
Device with built-in
Tuner
Audio Device
■ The Anynet+ function only works when the active source on the TV remote control is set
to TV.
■ The button works only while in the recordable state.
■ You cannot control Anynet+ devices using the buttons on the TV. You can control
Anynet+ devices only using the TV remote control.
■ The TV remote control may not work under certain conditions. In this case, reselect the
Anynet+ device.
■ The Anynet+ functions do not operate with other manufacturers' products.
■ The , operations may differ depending on the device.
Anynet + Menu
Description
Anynet + mode changes to TV broadcast mode.
Shows the Anynet + device list.
Shows the connected device menus.
E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
Shows the play menu of the connected device.
E.g. If a DVD recorder is connected, the play menu of the
DVD recorder will appear.
Starts recording immediately using the recorder.
(This is only available for devices that support the
recording function.)
Enables reserving a recording for the recorder. (This is only
available for devices that support the recording reservation
function.)
Stops recording.
Sound is played through the receiver.
Operating Status
After switching to the device,
when the menu of the
corresponding device is displayed
on the screen.
After switching to the device,
while playing a file
After switching to the device,
when you are watching a TV
programme
When Receiver is activated
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER E
buttons
Colour buttons / EXIT button
(Backward search) /
(Forward search) /
(Stop) /
(Play) /
(Pause)
P / button
/ button
=
M MUTE button
■ If more than one recording
device is connected, they
are displayed as (*recorder)
and if only one recording
device is connected, it will
be represented as (*device_
name).