PACE Technologies obligation under this warranty shall be limited to the repair or exchange, at PACE Technologies option, of any PACE Technologies Product or part which proves to be defective as provided herein. PACE Technologies reserves the right to either inspect the product at Buyer’s location or...
Page 4
Products shall pass to Customer upon PACE Technologies delivery of the Products to the common carrier of Pace Technologies choice, or the carrier specified in writing by Customer, for shipment to Customer.
The PENTA 7500 is a single belt hand grinder for coarse grit specimen planarization. A unique benefit of the PENTA-7500 belt grinder is the fixture for planarizing specimen mounts. This is very important for maintaining a square mount for automated polishing machines.
Web: https://www.metallographic.com Unpacking, Shipping and Installation 2.1 Unpacking The PENTA-7500 is shipped in a customized box. Unpack the foam, which is covering the machine, from the box. Then remove the unit from the remaining foam. 2.2 Shipping When moving machine, lift by the base.
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com 4.0 Start-Up and Operation 4.1 General The PENTA-7500 is a belt grinder specifically designed for metallographic sample planarization On/Off Switch Easy Remove...