CONTENT Catler recommends safety fi rst Know your CG 8011 coff ee grinder Key elements of your CG 8011 coff er grinder Operating your CG 8011 coff er grinder Care and Cleaning CONTENTS...
Page 4
Congratulations on the purchase of your new CG 8011 coff ee grinder. CONGRATULATIONS...
CATLER RECOMMENDS SAFETY FIRST We understand the importance of safety and that’s why we put your safety fi rst from the initial design concept to the production itself. Nevertheless, please be careful and follow the instructions below when using this appliance.
Page 6
• Do not submerge the appliance, power cord or plug in water or any other liquid. • Make sure that the mains cord and plug does not come into contact with water or other fl uid. CATLER RECOMMENDS SAFETY FIRST...
Page 7
• Before connecting the appliance to a power socket, check that the nominal voltage on the appliance's rating label matches the electrical voltage in the socket. CATLER RECOMMENDS SAFETY FIRST...
Page 8
Allow the appliance to fully cool down before cleaning or moving. • Keep the appliance and its accessories in clean condition. • Perform the cleaning and maintenance in accordance with the instructions in chapter Cleaning and maintenance. Never wash the CATLER RECOMMENDS SAFETY FIRST...
Page 9
• Do not disconnect the appliance from the power socket by pulling the power cord. This could damage the power cord or the power CATLER RECOMMENDS SAFETY FIRST...
Page 10
Do not use the appliance if it is damaged in any way or if the power cord or plug are defective. All repairs or adjustments must be performed at the nearest Catler authorised service centre. CATLER RECOMMENDS SAFETY FIRST...
Page 11
• Any maintenance other than standard cleaning must be performed at authorised Catler service centre. • We recommend to install a residual current device (standard safety switches in your power outlet) to provide a higher level of protection when using the appliance. We recommend to install a residual current device (with a nominal...
KNOW YOUR CG 8011 COFFEE GRINDER KNOW YOUR CG 8011 COFFEE GRINDER...
Page 13
9. Ground coff ee release chamber The release chamber is designed to allow you to grind coff ee directly into the handle as well as the jar. KNOW YOUR CG 8011 COFFEE GRINDER...
KEY ELEMENTS OF YOUR CG 8011 COFFER GRINDER Maintenance-free design Great detachable base The innovative design makes the coff ee A great detachable base captures the grinding very easy. Thus, you will be able ground coff ee residues during grinding. You to enjoy true espresso coff ee from freshly can easily remove and clean it.
OPERATING YOUR CG 8011 COFFER GRINDER BEFORE FIRST USE NOTE Remove all packaging from the appliance We recommend to fi ll the hopper and dispose of it in a proper manner. Before up to the maximum level line. This a proper disposal, make sure you have will exert a constant pressure on the...
Page 16
OFF When there is enough ground position. Remove the jar and wipe coff ee in the strainer, press the off the excess ground coff ee. handle grip again to stop the grinding. OPERATING YOUR CG 8011 COFFER GRINDER...
Page 17
If you ground very fi ne coff ee for a prolonged period of time, we recommend that you clean the millstones after some time. The cleaning procedure is described in the Care and Cleaning chapter further in this manual. OPERATING YOUR CG 8011 COFFER GRINDER...
CARE AND CLEANING Before cleaning, set the main switch to the CLEANING THE GRINDER BASE, COFFEE OFF position, unplug the mains cord from BEAN HOPPER AND GROUND COFFEE the power outlet and allow the appliance to cool down properly. 1. Remove the coff ee bean hopper from the grinder base and transfer the unused coff ee beans in an air-tight container.
Page 19
5. Clean the upper millstone with the 3. Press and hold the UNLOCK button at the supplied cleaning brush. back of the grinder base. Turn the milling 6. In order to clean the lower millstone, lift fi neness control knob anticlockwise with the fi neness control knob slowly - see your other hand until the graphic mark fi gure below.
Page 20
9. Put the upper millstone back and turn the fi neness control knob clockwise. STORAGE If the grinder is to be left unused, clean it according to the above instructions. Store the grinder in a well-ventilated dry place out of reach of children and animals. CARE AND CLEANING...
Page 21
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
Need help?
Do you have a question about the CG 8011 and is the answer not in the manual?
Questions and answers