Recording
You can make a recording of a TV programme using a recorder.
Press the
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣
The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➣
You can also record the source streams by selecting "Record" after pressing the TOOLS button.
➣
Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Then Press the ENTER
select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Receiver", then press the
ENTER
button.
2. Press the ◄ or ► button to select to "On", then press the
ENTER
button.
Now you can listen to sound through the receiver.
. Press the EXIT button to exit.
➣
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
➣
If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.
➣
Only when you have connected the optical jack of the TV and the receiver properly, does Receiver
work.
➣
In case of a content with copyright problem, listening through the receiver may not properly operate.
➣
If there is a power interruption to the TV when the "Receiver" is set to "On" (by disconnecting the
power cord or a power failure), the "TV Speaker" may be set to "Off" when you turn the TV on again.
(see page 24)
BN68-01604D-01Eng-0603.indd 59
button.
button to
TV
Move
Return
English -
P
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:Off
Setup
Enter
2008-06-03
1:56:02