Connectors & Jumper Settings - Infinite AERINOS ADS-270 User Manual

3.3 Connectors & Jumper settings
3.3.1 LED
D14: Status LED, Blinking in configuration mode.
3.3.2 Connectors
JMP1: Put a Jumper to enter configuration mode.
J1: USB Serial connector. The unit can be supplied through the USB connector for
configuration and test.
Caution: Remove the external power supply (J3), if applied, before connecting the
USB connector!
J2: Battery connector.
J3: External power supply, 5V (stabilized).
J4-1: 12VDC sensor excitation (switched)
J4-2: 5VDC sensor excitation (switched)
J4-3: GND (COM), Common for AI1
J5-1: DI1, Digital Input (Counter: software selectable)
J5-2: SDI-12 data line
ADS-270 User Guide 6